Multicast Port Filtering - D-Link DES-3550 User Manual

DES-3550 Layer 2
Figure 6- 15. Setup Static Multicast Forwarding Table
The following parameters can be set:
Parameter
VID
Multicast MAC
Address
Port Settings
Click Apply to implement the changes made. To delete an entry in the Static Multicast
Forwarding Table, click the corresponding
Multicast Forwarding Entries
window.

Multicast Port Filtering

The following figure and table describe how to set up Multicast forwarding on the Switch.
Open the Forwarding Filtering folder and click on the Multicast Port Filtering Mode
Setup link to see the entry screen below:
Fast Ethernet Switch User's Guide
Description
The VLAN ID of the VLAN the corresponding MAC address belongs to.
The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
Allows the selection of ports that will be members of the static multicast
group and ports that are either forbidden from joining dynamically, or that
can join the multicast group dynamically, using GMRP.
The options are:
None – no restrictions on the port dynamically joining the multicast group.
When None is chosen, the port will not be a member of the Static Multicast
Group.
Egress – the port is a static member of the multicast group.
link to return to the Static Multicast Forwarding Settings
under the Delete heading. Click the
58
Show All