D-Link DES-3550 User Manual page 98

DES-3550 Layer 2
Dscp(0-63)
Protocol
To view the settings of a previously correctly configured rule, click
Table to view the following screen:
To configure the Access Rule for Ethernet, open the Access Profile Table (figure 6-40) and
click Modify for an Ethernet entry. This will open the following screen:
To remove a previously created rule, select it and click the
Rule, click the Add button:
Fast Ethernet Switch User's Guide
This field allows the user to enter a Dscp value in the space provided, which
will instruct the Switch to examine the DiffServ Code part of each packet
header and use this as the, or part of the criterion for forwarding. The user
may choose a value between 0 and 63.
This field allows the user to modify the protocol used to configure the
Access Rule Table; depending on which protocol the user has chosen in
the Access Profile Table. In the example above, IGMP is the protocol chosen
and therefore the user may modify the IGMP settings for this access profile.
Figure 6- 46. Access Rule Display window (IP)
Figure 6- 47. Access Rule Table
98
in the Access Rule
button. To add a new Access