superbrightleds GSL-SW Series User Manual

Important: Read all instructions prior to installation.
Gooseneck LED Sign Light
Straight Shade
Specifications
Environmental Specifications
Operating Temperature
IP Rating
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
Angle Adjustment
Loosen locking nut and swivel to adjust. Installed reflector may reduce rotation range.
Tighten when desired position is reached.
90.00°
Angled Shade
-40°–104° F (-40°–40° C)
IP65
60.00°
Safety and Notes
• Product should be installed and serviced in accordance with applicable national,
state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power source and
circuit breakers are switched off before performing any installation or wiring
procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the weight of the
fixture. Failure to properly support fixture may result in damage or injury, for
which the manufacturer does not assume responsibility.
• Suitable for wet locations and intended for outdoor use only.
• Suitable for wall mount only, minimum 4 ft from the ground surface.
Wiring Diagram
Line
Neutral
Ground
Dim (+)
Dim (-)
12 VDC AUX+
12 VDC AUX-
Rev Date: V1 04/24/2024
4400 Earth City Expy, St. Louis, MO 63045
User Manual
GSL-SW Series
120–277 VAC Input
Black or Brown
L L
White or Blue
N N
Green or Green/Yellow
GND GND
Purple
+ +
Gray or Pink
- -
Black or Black/White
- -
Blue or Blue/White
- -
866-590-3533 superbrightleds.com