Preliminary Checks - Preliminar Checks; Inkörning - Running In; Allmänna Egenskaper Vid Användning Av Ljustornet - General Characteristics Using Of The Lighting Tower - Generac Power Systems V20 Owner's Manual

V20 8,5m 4x320W LED

13.5 PRELIMINARY CHECKS - PRELIMINAR CHECKS

At the time of purchase, the machine is
supplied with engine oil and hydraulic oil and
coolant in the radiator.
Before each next use, check the relative levels.
Make sure that the thermal switches on the
front panel are in the "OFF" (0) position.
Make sure that no device is connected to the
socket 230÷240 V 16 A(20).
Make sure that the emergency stop button (19)
is activated. If this is not the case, turn the
knob clockwise.
13.6 INKÖRNING - RUNNING IN
In order to allow a good run-in of the machine,
do not, during the first 50 hours of operation of
the machine, take out more than 70% of the
maximum power specified in the technical
Specifications.
ALLMÄNNA EGENSKAPER VID ANVÄNDNING AV LJUSTORNET – GENERAL
13.7
CHARACTERISTICS USING OF THE LIGHTING TOWER
The light tower is designed for both manual and
automatic ignition.
A twilight sensor controlled by a GTL01 logic,
mounted on the machine allows the headlights
to turn on and off, when sunlight returns
By setting the timer mounted on the machine
controlled from the GTL01 control panel,
ignition and extinguishing of the headlamps is
allowed at the desired time
(if any).
KUBOTA ENGINE
At the moment of purchase, the machine is
supplied of engine oil, hydraulic oil and
coolant in the radiator.
Before every next use, verify the relative
levels.
Check that the circuit breakers placed on the
frontal board are in "OFF" (0) position.
Make sure that any load is connected to the
plug 230÷240 V 16 A (20)
Make sure that the emergency stop button
(19) is armed. If it doesn't, turn the grip
handle in clockwise direction.
For the first 50 hours of operation of the
machine do not employ more than 70% of the
maximum power indicated in the technical
specifications. In this way, a proper engine
running in is guaranteed.
The hybrid system can be run in Manual or
Automatic mode.
A light intensity sensor mounted on the
GTL01 control panel, allows to control the
lamps status as function of the environmental
brightness (on available).
By setting up the timer mounted on the
GTL01 control panel, it is possible to turn on
and off the floodlights at the agreed time
(on available).
40
TL193-18-09-00
17-09-2018
Italiano-English