Dane Techniczne - ENGO CONTROLS EWT100 Operation And Installation Manual

5. Dane techniczne

Maximum current consumption with loaded outputs
Maximum current consumption without loaded outputs
Output current Pump: Mixer actuator ON: Mixer actuator OFF: Heat
Controller's level of protection
Outer temperature
Storage temperature
Relative humidity
Measuring inputs, temperature (low voltage)
Measuring scope of sensors' temperature CT10
Measuring scope of sensors' temperature CT6-P
Accuracy of measuring temperature with sensors CT10 and CT6-P
Clamps for network and signal
EWT100 FULL MANUAL
Power
source contact:
Display
Dimensions
Weight
Norms
Software class
Mounting
1,5(1,5)A /230V 0,5(0,5)A /230V 0,5(0,5)A /230V 0,5(0,5)A /230V
0...65 C, without directsunlight
o
10 - 90%, without steam condensation
T1 – mixer temp. T2 – external temp. T3 – return temp. T4 – heat
source temp. T –room thermostat input
Screw clamps, wire profile up to 2,5mm2 , tighten moment 0,4Nm,
isolation lenght 6mm
PN-EN 60730-2-9 PN-EN 60730-1
11
230V~, 50Hz
3(3)A
0,02A
IP20
0...40 C
o
0..100 C
o
-35..+40 C
o
±2 C
o
Graphic: 128x64
140x99x43 mm
280g
A
on the wall