Figure 46. Vtref Voltage Regulator Configuration; Figure 47. Temperature Threshold Configuration - ST AutoDevKit AEK-POW-BMS63EN User Manual

Step 25. Configure Vtref voltage regulator. If the "Vtref Enable" field is enabled, the voltage regulator will be
active when required (for example, during voltage acquisition on GPIOs if the Ratiometric mode is
enabled). If the "Vtref Always ON" field is enabled, the voltage regulator is always active.
Step 26. Configure temperature thresholds (in voltage) if the first chain node is an AEK-POW-BMSNOTX
evaluation board. If the first chain node is a different board, the thresholds are not customizable.
UM3185 - Rev 3
Figure 46. Vtref voltage regulator configuration
Figure 47. Temperature threshold configuration
UM3185
AutoDevKit ecosystem
page 42/88