Table of Contents
Advertisement
LED Indicators
Power Indicator (PWR)
This indicator lights green when the hub is receiving
power, otherwise, it is off.
Full/Hanf Duplex,10/100M Collision
(10/100M FDX
This LED indicator light green when a respective port is
in full duplex (FDX) mode. Otherwise, it is OFF for half
duplex (HDX) operations.
collisions are occurring on the respective port.
100M Link/Activity,10M Link/Activity
(100M LINK/ACT
This indicator light green when the port is connected to a
100Mbps Fast Ethernet station, if the indicator blinking
green will be transmissing or received data on the
100Mbps network. Otherwise, if the indicator light amber
when the port is connected to a 10Mbps Ethernet station,
if the indicator blinking amber will be transmissing or
received data on the 10Mbps network.
100BASE-FX Module Indicator
The FX Link/Rx, indicate a good link to a module
installed.
,10/100M COL
(green)
, 10LINK/ACT
(green)
(amber)
It blinking amber when
(amber)
(green)
14
)
)
Advertisement
Table of Contents
