Hub To Switch; 10Base-T Hub; 100Base-Tx Hub - TRENDnet TE100-S1616 User Manual

Hub to Switch

A hub (10 or 100BASE-TX) can be connected to the Switch
via a two-pair Category 3, 4, 5 UTP/STP straight cable. The
connection is accomplished from the hub uplink (MDI-II)
port to any of the Switch (MDI-X) ports.
A. 10BASE-T Hub
For a 10BASE-T hub, the Switch LED indicators should light
up as the following:
"10/100M FDX, 10/100M COL" LED indicator is OFF.
"100M LINK/ACT, 10LINK/ACT" LED indicator is light
amber.
B. 100BASE-TX Hub
For a 100BASE-TX hub, the Switch LED indicators should
light up as the following:
"10/100M FDX, 10/100M COL" LED indicator is OFF.
"100M LINK/ACT,10M LINK/ACT" LED indicator is light
green.
16