Subscribe to Our Youtube Channel
Related Manuals for Roger ME-44-S
Summary of Contents for Roger ME-44-S
- Page 1 Roger Access Control System Metal Enclosure ME-44-S Operating Manual Product version: v1.1 Firmware version: – Document version: Rev. B...
-
Page 2: Installation
13.8V/10A, tamper contact and main fuse switch. Access to the internal space of the enclosure is protected by a door fixed by screws. Optionally, the door can be equipped with a key lock. The ME-44-S is made of a metal sheet painted with an anthracite grey powder coating. 2. I NSTALLATION 1. - Page 3 Operating manual ME-44-S 2024-09-05 Warnings The installation can be done by qualified person only who poses all necessary certificates concerning connection/maintenance of 230VAC and low voltage networks. The network circuit supplying the device must be equipped with an installation switch with a nominal current of 6A.
- Page 4 Operating manual ME-44-S 2024-09-05 Fig. 2 Internal view of ME-44-S enclosure: A: Mains Supply Terminal Blocks with Fuse; B: Mains Supply Entry Hole with Protective Sleave; C: Low Voltage Connection Holes; D: Tamper Contact; E: Power Supply Module; F: Door PE Connector G: Cable Tie Eyelets; H: Power Distribution Module...
-
Page 5: Specification
Operating manual ME-44-S 2024-09-05 Fig. 3 Cable fixing method Fig. 4 Forming a cable entry hole in the bottom or top wall of the enclosure 3. S PECIFICATION Parameter Value Nominal Power Supply 230VAC Rated Input Power 150W Rated Output Voltage... -
Page 6: Ordering Information
Weight of the equipment is specified in the document. Contact: Roger Sp. z O. O. Sp. K. 82-400 Gościszewo 59 Tel.: +48 55 272 0132 Fax: +48 55 272 0133...
Need help?
Do you have a question about the ME-44-S and is the answer not in the manual?
Questions and answers