TRENDnet TDM-C504 User Manual page 26

VC-Mux
Note:
Channel Mode: Select "1483 Bridged" from the drop down manual.
Configuration Procedure :
1. From the WAN – Channel Config page, click and select 1483 Bridged connection mode from the
Channel Mode drop down manual. The default 1483 Bridged connection setup is displayed.
2. Under the Channel mode, enter the values of VPI and VCI settings.
3. Click the radio button and elect the Encapsulation type ( LLC or VC-Mux).
Your ADSL service provider or your ISP will supply these. In this case the ADSL service
Note:
provider is using LLC.
4. Click "Add" button after setup.
5. You can "Edit" ( ) or "Delete" ( ) the existing connection profile under the Actions column.
6. Click "Admin/ Commit/Reboot". Press "Commit" to save the settings into flash memory.
7. The new settings will take effect after reboot the system.
8. The following window display indicates the system restarting process. The System Home page will
shows all the connection status and system information.
MER(Mac Encapsulation Routing) Mode
1483 MER: 1483 MER also commonly known as 1483 Bridged Router mode. When 1483 MER mode is
selected, the following screen will pop-up. Most Internet users are provided with a dynamic IP address by
their ISP for each session, however certain situations call for a Fixed (Or Static) IP address. Fixed (Or Static)
is used whenever a known Fixed (Or Static) IP is assigned. The accompanying information such as the
Subnet mask and the gateway should also be specified. Up to three Domain Name Server (DNS) addresses
can also be specified. These servers would enable you to have access to other web servers. Valid IP
addresses range is from 0.0.0.0 to 255.255.255.255.
LLC and VC-Mux are two different methods of encapsulating the PPP packet.
Contact your ISP to make sure which encapsulation is being supported.
10