TRENDnet TDM-C504 User Manual page 20

4-port adsl 2/2+ modem router

Hide thumbs Also See for TDM-C504:

Table of Contents

Step 1: Select your country from the Country list and the ADSL service provider from the ISP List (If there

are more than two ISP in your country) and note the "Encapsulation" type and "VPI & VCI" setting.

Note: Click "CONFIG" if you cannot find your parameters available in the pull down menu. Contact your ISP

for configuration settings.

For countries with the following "Encapsulation" type , you will enter into set Username and

Password window as shown below:

PPPoA VC-Mux

PPPoA LLC

PPPoE VC-Mux

PPPoE LLC

Manually enter your "User Name" and "Password" which will be provided by your Service Provider

(ISP). Click "Save" after setup.

Click Commit and Reboot button to commit changes to system memory and reboot router.

For countries with the following "Encapsulation" , the following window will pop-up:

1483 Routed IP VC-Mux

Table of Contents