Adsl; Diagnostic Test - TRENDnet TDM-C500 User Manual

Adsl 2/2+ modem router

Hide thumbs Also See for TDM-C500:

Table of Contents

−

Connection endpoint: the end of a VP/VC connection where the ATM cell are terminated

−

Segment endpoint: the end of a connection segment

This page allows you to use ATM ping, which generates F5 segment and end-to-end loop-back cells to test

the reach ability of a segment endpoint or a connection endpoint.

Fields in this page:

Field

Description

Select PVC

Select the PVC channel you want to do the loop-back diagnostic.

Flow Type

The ATM OAM flow type. The selection can be F5 Segment or F5 End-to-End.

Loopback Location ID

The loop-back location ID field of the loop-back cell. The default value is all 1s (ones)

to indicate the endpoint of the segment or connection.

This page shows the ADSL diagnostic result. Click Start button to start the ADSL diagnostic.

The Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol

layer for both LAN and WAN sides.

ADSL

Table of Contents