Time Zone - TRENDnet TDM-C500 User Manual

Simple Network Timing Protocol (SNTP) is a protocol used to synchronize the system time to the public
SNTP servers. The DSL device supports SNTP client functionality in compliance with IETF RFC2030. SNTP
client functioning in daemon mode which issues sending client requests to the configured SNTP server
addresses periodically can configure the system clock in the DSL device
Fields in this page:
Field Description
Current Time The current time of the specified time zone. You can set the current time by yourself
or configured by SNTP.
Time Zone Select The time zone in which the DSL device resides.
Enable SNTP client Enable the SNTP client to update the system clock.
update
SNTP server The IP address or the host name of the SNTP server. You can select from the list or
set it manually.
Function buttons in this page:
Apply Changes
Click to save the setting to the configuration.

Time Zone

48