TRENDnet TDM-C500 User Manual page 40

and how quickly a message or data is transferred from a source host to a destination
PCR Peak Cell Rate, measured in cells/sec., is the cell rate which the source may never
CDVT
(Asynchronous Transfer Mode) to describe the time difference that is acceptable
between cells being presented at the receiving host. Available only when VBR QoS is
SCR Sustained Cell Rate, measured in cells/sec., is the average cell rate over the duration
MBS Maximum Burst Size, a traffic parameter that specifies the maximum number of cells
Apply Changes
Set new PVC OoS mode for the selected PVC. New parameters will take effect after save into flash memory
and reboot the system. See section "Admin" for save details.
Undo
Discard your settings.
host over a network. The four QoS options are:
− UBR (Unspecified Bit Rate): When UBR is selected, the SCR and
− CBR (Constant Bit Rate): When CBR is selected, the SCR and
− nrt-VBR (non-real-time Variable Bit Rate): When nrt-VBR is
selected, the SCR and MBS fields are enabled.
− rt-VBR (real-time Variable Bit Rate): When rt-VBR is selected, the
Cell Delay Variation Time. The Cell Delay Variation is a term used in ATM
that can be transmitted at the peak cell rate.
MBS fields are disabled.
MBS fields are disabled.
SCR and MBS fields are enabled.
exceed.
chosen.
of the connection.
19