Channel:
VPI: Virtual Path Identifier is a virtual path used for cell routing that is identified by an 8-bit
field in the ATM cell header. The VPI field specifies this 8-bit identifier for routing.
VCI: A Virtual Channel Identifier is a virtual channel that is identified by a unique numerical
tag that is defined by a 16-bit field in the ATM cell header. The purpose of the virtual
channel is to identify where the cell should travel. The VCI field specifies this 16-bit
numerical tag that determines the destination.
Encapsulation: There are 2 Encapsulation type:
LLC
VC-Mux
LLC and VC-Mux are two different methods of encapsulating the PPP packet.
Note:
Contact your ISP to make sure which encapsulation is being supported.
Channel Mode: Select "1483 MER" from the drop down manual.
Enable NAPT: Select "Disable" or "Enable" the NAPT functionality. Default setting is
"Enable".
WAN IP:
Type: Click the radio button to select "Fixed IP" or "DHCP" mode.
Fixed IP: You need to fill in the "Local IP Address", "Subnet Mask", "Remote IP
Address" which will be provided by your ADSL Service provider or ISP.
DHCP: Dynamic Host Configuration Protocol (DHCP) allows the 4 Ports ADSL2/2+
Router to automatically obtain the IP address from the server. This option is
commonly used in situations where the IP address is dynamically assigned and is not
11