Hardware connections
Connecting the WLAN ADSL Router
1. Connect ADSL Cable
Connect the supplied RJ-11 ADSL cable from to the DSL port on the Wireless
ADSL Router (the RJ11 connector) to the ADSL terminator provided by your
phone company.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the LAN ports on the Wireless
ADSL Router.
3. Connect Power
Connect the supplied power adapter to the Wireless ADSL Router. Use only the
power adapter provided. Using a different one may cause hardware damage.
Check the installation
The LEDs on the WLAN ADSL Router are clearly visible and the status of the
network link can be seen instantly:
1. With the power source on, once the device is connected to the phone line and
PCs, the Power, LAN, WLAN and DSL, INETRNET LEDs of the WLAN
ADSL Router will light up indicating a normal status.
2. When the ADSL line is connected the DSL LED will light up.
3. When the Internet is connected the INTERNET LED will light up. (Need to
configuration)
7