Snmp - TRENDnet TDM-C500 User Manual

Add Route
Add a user-defined destination route.
Update
Update the selected destination route on the Static Route Table.
Delete Selected
Delete a selected destination route on the Static Route Table.
Show Routes
Click this button to view the DSL device's routing table.
Simple Network Management Protocol (SNMP) is a troubleshooting and management protocol that uses the
UDP protocol on port 161 to communicate between clients and servers. The DSL device can be managed
locally or remotely by SNMP protocol.
Field Description

SNMP

Enable/disable SNMP Feature.
System Description System description of the DSL device.
System Contact Contact person and/or contact information for the DSL device.
System Name An administratively assigned name for the DSL device.
System Location The physical location of the DSL device.
System Object ID Vendor object identifier. The vendor's authoritative identification of the network
management subsystem contained in the entity.
Trap IP Address Destination IP address of the SNMP trap.
Community name Name of the read-only community. This read-only community allows read operation
(read-only) to all objects in the MIB.
Community name Name of the write-only community. This write-only community allows write operation
(write-only) to the objects defines as read-writable in the MIB.
SNMP
36