Parts List Post Post Base Base Beam(1) Beam(2) Slanting Bar Corner Connector Big Top Beam Mid Beam Netting Bar Big Top Connector Hook Large Canopy Wall Mosquito Netting Hardware Pack Used in Step 1 M6x15 Screw 48 PCS M6 Flat Washer 72 PCS M6x15 Bolt 24 PCS...
Page 3
Tighten the Base protector (C) onto the Post (A), attach the Base (B) to Post (A) by using Screw Fig.1: (AA) and Flat Washer (BB). Attach the Beam (D) to the Beam (E) by using Bolt (CC) and Flat Washer (BB). Fig.2: Attach the well-connected Beam to the Post (A), assemble the Beam and the top of the Post (A) by Fig.3:...
Page 4
Hardware Pack Used in Step 2 M6x15 Screw 8 PCS M6 Flat washer 8 PCS Attach the Corner Connector (G) to the top of Post (A) by using Screw (AA) and Flat Washer Fig.6: (BB). Attach the Hook (L) to the Big Top Connector (K), Insert the Mid Beam (I) and the Beam (H) into Fig.7: the Big Top Connector (K).
Page 5
Spread the Large Canopy (M), hang the pothooks of the large Fig.9: canopy into the holes on the panels. Hang Mosquito Netting (O) on the Netting Bar (J) by using the Fig.10: Plastic Ring (GG). Hang the Wall (N) on the tube of the Beam(D、E) by using the Fig.11: Plastic Ring (GG).
Page 6
IMPORTANT: 1. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Please read all instructions before assembly and use. 2. Some parts may contain sharp edges, wear protective gloves if necessary. At least five or more people are recommended for safe assembly.
Liste des pièces Poteau Base de poteau Base Poutre (1) Poutre (2) Barre de traverse Connecteur de coin Grande poutre supérieure Poutre du milieu Barre de filet Grand connecteur du haut Crochet Grande toile Cloison Moustiquaire Paquet de pièces de quincaillerie 1 Vis M6x15 48 PCS Rondelle M6...
Page 9
Fixer le protecteur de base sur le poteau (A), attacher la base (B) au poteau (A) en utilisant les Fig.1: vis (AA) et rondelles (BB). Attacher la poutre (D) à la poutre (E) en utilisant les boulons (CC) et rondelles (BB). Fig.2: Attacher la poutre bien connectée au poteau (A).
Page 10
Paquet de pièces de quincaillerie 2 Vis M6x15 8 PCS Rondelle M6 8 PCS Attacher le connecteur de coin (G) au haut du poteau (A) en utilisant les vis (AA) et les Fig.6: rondelles (BB). Attacher le crochet (L) au grand connecteur du haut (K), insérer la poutre du milieu (I) et la Fig.7: poutre (H) dans le grand connecteur du haut (K).
Page 11
Étendre la grande toile (M), suspendre les crochets de la grande Fig.9: toile dans les trous des panneaux. Suspendre la moustiquaire (O) sur la barre de filet (J) en Fig.10: utilisant les anneaux en plastique (GG). Suspendre le mur (N) sur le tube de la poutre (D、E) en utilisant Fig.11: les anneaux en plastique (GG).
Page 12
IMPORTANT : 1. Lors du montage et de l'utilisation de ce produit, des précautions de sécurité élémentaires doivent toujours être respectées pour réduire le risque de blessures et de dommages matériels. Veuillez lire toutes les instructions avant le montage et l'utilisation. 2.
Need help?
Do you have a question about the Valence L-GZ672PST-G and is the answer not in the manual?
Questions and answers