Arkon LockVise TAB588L22AL Manual

TAB588L22AL | LockVise™ Locking Seat Rail Tablet Mount with 22" Gooseneck
TAB005KL
Attach the AMPS Adapter Plate to the tablet holder
Detach the AMPS adapter plate from the gooseneck. Then, align
the holes on the back of the tablet holder with the plate. Insert the
four mounting screws (included in the tablet holder packaging)
through the AMPS adapter plate into the tablet holder. Securely
tighten the screws to complete the installation.
WARNING
CHOKING HAZARD - Keep out of reach from children under 8 yrs. as they can choke or suffocate on parts included with this system
WARNING
Arkon ® is not responsible for any damages caused to your device or yourself due to the installation or use of this mount. Do not install Arkon
of vehicles. Arkon ® assumes no responsibility or liability for injury or death as a result of failure to install in a safe location. Arkon
product, or people due to the installation or use of this product.
GN088AMPSL22AL
USA (800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm PST
Includes:
1 – LockVise™ Locking Tablet Holder Kit
1 – 22" Aluminum Seat Rail Mount with Hardware
Compatibility: This holder ensures compatibility with a wide range of tablets,
including the most popular models, from 7"-10.5" in screen size.
Warning: Drilling into the dash, floor, or console may damage the vehicle. Use
caution and consult a mobile install professional to avoid drilling into the gas tank,
electrical system, or other highly sensitive vehicle components.
Assemble the components
Put together the parts by attaching the gooseneck ball to the
rear of the tablet holder. Afterwards, tighten the ring to ensure
a secure fit.
® is not responsible for any damages caused to vehicles,
arkon.com
Designed in USA
©Arkon Resources, Inc.
(TAB005KL)
(GN088AMPSL22AL)
® products near areas that intefere with operation
Continued on page 2
Need assistance?
Scan to email our
Arkon® customer
service team.
rev.072324