Wps W/Pin Code (For Hl-3070Cw Wireless Network Only); Wlan Status (For Hl-3070Cw Wireless Network Only) - Brother HL-3040CN Network User's Manual

WPS w/PIN Code (For HL-3070CW wireless network only)

If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (See Wireless configuration using the PIN Method of Wi-Fi Protected Setup
(For HL-3070CW) in Chapter 7.)

WLAN Status (For HL-3070CW wireless network only)

Status
This field displays the current wireless network status; Active(11b), Active(11g), Wired LAN Active,
WLAN OFF, Connection Fail, or AOSS Active.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g), Wired LAN
Active, WLAN OFF, Connection Fail, or AOSS Active.
g
Press OK again.
®
. By inputting a PIN which is created by an Enrollee (your machine) to the
Control panel features
8
8
8
8
118