Reset The Network Settings To The Factory Default - Brother HL-3040CN Network User's Manual

Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs Also See for HL-3040CN:
Table of Contents

Advertisement

Reset the network settings to the factory default

You can reset the print server back to its factory default settings (resetting all information such as the
password and IP address information.)
Note
You can also reset the print server back to its factory default settings using the BRAdmin applications or
Web Based Management (web browser). For more information, see Changing the print server settings on
page 16.
a
Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine to take the
machine off-line.
d
Press + or - to choose Network.
Press OK.
e
Press + or - to choose Factory Reset.
Press OK.
f
When Restart Printer? appears, press OK again. The machine will restart.
Control panel features
8
8
122

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-3070cw

Table of Contents