Wps W/Pin Code (For Hl-3070Cw Wireless Network Only); Wlan Status (For Hl-3070Cw Wireless Network Only) - Brother HL-3040CN Network User's Manual

WPS w/PIN Code (For HL-3070CW wireless network only)

If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance. By inputting a PIN which is created by an Enrollee (your machine) to the
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode. (See Wireless configuration using the PIN Method of Wi-Fi Protected Setup
(For HL-3070CW) in Chapter 7.)

WLAN Status (For HL-3070CW wireless network only)

Status
This field displays the current wireless network status; Active(11b), Active(11g), Wired LAN Active,
WLAN OFF, Connection Fail, or AOSS Active.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose WLAN Status.
Press OK.
e
Press + or - to choose Status.
Press OK.
f
The current wireless network status will be displayed; Active(11b), Active(11g), Wired LAN
Active, WLAN OFF, Connection Fail, or AOSS Active.
g
Press OK again.
Control panel features
8
8
8
8
65