Brother HL-3040CN Network User's Manual page 120

IP Address
This field displays the current IP address of the machine. If you have chosen a Boot Method of Static,
enter the IP address that you wish to assign to the machine (check with your network administrator for the IP
address to use). If you have chosen a method other than Static, the machine will attempt to determine its
IP address using the DHCP or BOOTP protocols. The default IP address of your machine will probably be
incompatible with the IP address numbering scheme of your network. We recommend that you contact your
network administrator for an IP address for the network the unit will be connected on.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose IP Address.
Press OK. The first part of the number will be blinking.
f
Press + or - to increase or decrease the number.
Press OK to go to the next number.
g
Repeat this process until you have set your IP address.
h
Press OK to finish the IP address.
An asterisk appears at the end of the LCD.
Control panel features
8
8
110