Brother HL-3040CN Network User's Manual page 125
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-3040CN:
- Service manual (437 pages) ,
- User manual (200 pages) ,
- Network user's manual (154 pages)
Table of Contents
Advertisement
IPv6
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com/.
a
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
b
Press + or - to choose Network.
Press OK.
c
For HL-3070CW
(For wired) Press + or - to choose Wired LAN.
(For wireless) Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose TCP/IP.
Press OK.
e
Press + or - to choose IPv6.
Press OK.
f
Press + or - to choose On or Off.
Press OK.
Note
If you set IPv6 to On, turn off the power switch and then turn it back on to enable this protocol.
Control panel features
8
8
115
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
