Wireless Configuration Using The Pin Method Of Wi-Fi Protected Setup (For Hl-3070Cw); Overview; How To Configure Your Wireless Machine, Using The Pin Method Of Wi-Fi Protected Setup - Brother HL-3040CN Network User's Manual

Wireless configuration using the PIN
7
Method of Wi-Fi Protected Setup
(For HL-3070CW)

Overview

If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the
machine easily. The PIN (Personal Identification Number) Method is one of the connection methods
developed by the Wi-Fi Alliance
Registrar (a device that manages the wireless LAN), you can setup the wireless network and security
settings. See the user's guide for your wireless access point/router for instructions on how to access the
Wi-Fi Protected Setup mode.
Note
Routers or access points that support Wi-Fi Protected Setup have a symbol as shown below.
How to configure your wireless machine, using the PIN
Method of Wi-Fi Protected Setup
IMPORTANT
If you are going to connect the Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
a
Make sure that the power cord is plugged in.
b
Turn on the machine and wait until the machine is in the Ready state.
c
Press any of the Menu buttons (+, -, OK or Back) of the control panel on your machine.
d
Press + or - to choose Network.
Press OK.
e
Press + or - to choose WLAN.
Press OK.
f
Press + or - to choose WPS w/PIN Code.
Press OK.
g
The LCD will show an 8 digit PIN and the machine starts searching for an access point for 5 minutes.
®
. By inputting a PIN which is created by an Enrollee (your machine) to the
Wireless configuration using the PIN Method of Wi-Fi Protected Setup (For HL-3070CW) 7
7
7
7
7
98