Advertisement
User Manual BACnet Master / Modbus Slave
Document code: MN67712_ENG
Revision 1.200
Page 18 of 37
Industrial Electronic Devices
ETHERNET:
The BACnet/IP connection and the updating of the converters must be made using Connector3 and/or Connector4 and/or Connector5 of
HD67712 with at least a Category 5E cable. The maximum length of the cable should not exceed 100m. The cable has to conform to the
T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the device to an Hub/Switch is recommended the use of a straight
cable, to connect the device to a PC/PLC/other is recommended the use of a cross cable.
ADFweb.com S.r.l.
Advertisement
Need help?
Do you have a question about the HD67712-IP-2-A1 and is the answer not in the manual?
Questions and answers