Fnirsi HRM-10 Manual page 16

4.Operating Instructions
①Power on:Short press
②Shut down: long press
③Adjust voltage: short press
/ to switch range.
④Adjust the resistance: short press
short press
⑤Sorting Mode:Long press
and click
groups of customized threshold data groups, short press
to switch data groups, and
set. In the sorting mode, the test results will be automatically
evaluated and compared with the set threshold interval to judge
whether they pass or fail, so as to filter out the qualified devices, and
the evaluation will also be automatically saved in the history record.
⑥Export data to the computer: the device through the USB to TYPEC
cable connected to the computer, it will pop up a U disk, at this time
the U disk inside the table is the recorded data.
⑦Voltage and resistance calibration: Long press
menu, choose whether to calibrate voltage or resistance, click
enter, follow the instructions to select the gear calibration. Each range
is calibrated manually separately and does not affect each other.
Restoring the machine to factory settings will restore the factory
calibration parameters.
to power on.
to shut down.
/ to switch the range.
to enter Sorting Mode. In sorting mode, there are 8
to select voltage, then short press
to select resistance, then
to enter the menu, select Sorting Mode
/ to select the threshold value to be
11
/
to enter the
to