Using The Scan Key (For Usb Cable Users); Scan To E-Mail - Brother DCP-7030 Software User's Manual

Using the Scan key
(For USB cable users)
Note
If you use the Scan key on a network, see Using the Scan key on page 181.
You can use the
graphics or E-mail applications or to a folder on your Macintosh
Before you can use the
Software Suite and connect the machine to your Macintosh
included CD-ROM, then the correct drivers and ControlCenter2 are installed. Scanning by the
key follows the configuration on the Device Button tab. (See SCAN on page 162.) For details about how to
configure the ControlCenter2 buttons to launch the application of your choice using the
see Using ControlCenter2 on page 160.

Scan to E-mail

You can scan either a black and white or color document into your E-mail application as a file attachment.
You can change Scan configuration. (See E-mail on page 166.)
a
Put the document face up in the ADF, or face down on the scanner glass.
b
Press the (Scan) key.
c
Press a or b to choose Scan to E-mail.
Press OK.
d
Press Start.
The machine starts scanning the document, creates a file attachment, and launches your E-mail
application, displaying the new message waiting to be addressed.
Note
If you want the scanned data in color, choose color in the scan type on the Device Button tab of the
ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in
the scan type on the Device Button tab of the ControlCenter2 configuration. (See E-mail on page 166.)
(Scan) key on the control panel to scan documents directly into your word processing,
(Scan) key on the control panel, you have to install the Brother MFL-Pro
®
.
®
. If you installed the MFL-Pro Suite from the
Scanning
9
(Scan)
(Scan) key,
9
9
154