Scan To Ftp (Mfc-7440N And Mfc-7840W Only) - Brother DCP-7030 Software User's Manual

Scan to FTP (MFC-7440N and MFC-7840W only)

When you choose Scan to FTP, you can scan a black and white or color document directly to an FTP server
on your local network or on the internet.
The details required to use Scan to FTP can be entered manually at the control panel or by using Web Based
Management to pre-configure and store the details in an FTP Profile.
For information on how to manually enter the Scan to FTP details, see Scan to FTP Manual Method
on page 88. To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser, and then you can configure or change the settings in the
Administrator Settings. You can configure up to ten FTP server profiles.
a
Enter the name that you want to use for the profile of the FTP server. This name will be displayed on the
LCD of the machine and can be up to 15 characters.
Network Scanning (For models with built-in network)
4
4
85