Using The Scan Key (For Usb Cable Users) - Brother 8085DN - DCP B/W Laser Software User's Manual

Using the Scan key (For USB cable users)

Note
If you use Scan on a network, see Using the Scan key on page 203.
You can use (Scan) on the control panel to scan documents directly into your word processing,
graphics or E-mail applications or to a folder on your Macintosh.
Before you can use
connect the machine to your Macintosh. If you installed the MFL-Pro Suite from the included CD-ROM, then
the correct drivers and ControlCenter2 are installed. Scanning by
the Device Button tab. (See SCAN on page 182.) For details about how to configure the ControlCenter2
buttons to launch the application of your choice using
Note
• If you want to scan a document using the duplex scanning feature, you need to put the document in the
ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.
• Choose your document layout from the following table:
Portrait
Front
Front
• Duplex scan is not supported by the DCP-8080DN and MFC-8480DN.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for legal size paper.
• The XPS file format is available for Windows Vista
Specification files.
(Scan) on the control panel, you have to install the Brother MFL-Pro Suite and
Back Front
Back Front
Document Layout Table
(Scan) follows the configuration on
(Scan), see Using ControlCenter2 on page 180.
Landscape
Back
Back
®
or when using applications which support XML Paper
Scanning
9
9
LCD Message
(L)edge
(Long edge)
(S)edge
(Short edge)
170