Connections; Connecting To Your Tv - RCA RTB1023 User Manual

Connections and Setup

Connecting to your TV

Method 1 (best)
HDMI
• Connect the HDMI OUT jack on the rear of the unit
to the HDMI IN jack on your TV using a HDMI cable
(not included).
• You can select the resolution of the player's HDMI
output signals (HDMI Auto, 1080p, 1080i, 720p,
480p and 480i) to match your TV's resolution
capabilities, please see instructions on page 20 for
details.
Method 1
To HDMI
output
Notes
• Refer to the owner's manual of the connected TV
as well.
• HDMI, the HDMI logo and High-Defi nition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
• If your television is a high defi nition television
with an HDMI input, we highly recommend you
use use the unit's HDMI output to get the highest
possible video resolution.
TV
HDMI
HDMI cable
(not supplied)
Method 2 (good)
Component video jacks (Pr, Pb, Y)
• The component video jacks are color-coded
green, blue and red.
• Additional component video cables (not supplied)
are required. They are usually color-coded green,
blue and red.
• Connect the component video OUT jacks on the
unit to the component video IN jacks on your TV.
Method 3 (basic)
Composite video jack (yellow)
• This video jack is color-coded yellow.
• Use the video cable with yellow plugs (supplied)
for good picture quality.
• Connect the video OUT jack on the unit to the IN
jack on your TV.
Method 2
To HDMI
input
Notes
• If one of the devices is not working, check that all
the cables have been inserted properly into the
jacks.
• If your component has only one input for audio
(mono), connect it to the left (white L/Mono)
audio jack on the TV and don't connect the right
audio part of the cable.
- 7 -
Component
Video Cable
(not supplied)
Green Blue Red
TV
VIDEO IN
Y
P
B
VIDEO IN
P
R
Method 3
Video Cable
(included)