Network Setting; Quick Setup; Bd-Live Setting - RCA RTB1023 User Manual

The Settings Menu
Network Settings
1. In the main menu of Settings, press
then use or button to select Network.
2. Press button.
3. Press or button to select Wired, then press OK
button. The IP Settings screen appears. If the network
connection is active, Link Up appears next to Link
Status. If the network connection is not active, Link
Down displays next to Link Status.
4. Press or button to select IP Mode, then
press OK button.
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
5. Press or button to select an IP Mode. You
can select:
• Dynamic — Uses DHCP to automatically obtain
an IP address.
• Manual — Lets you manually confi gure network
settings, such as IP address, subnet mask, and
gateway settings.
• Off — Disables the network interface.
6. Press or EXIT button to go to the previous
menu.
Network Test
Selecting the Network Test will cause the player to
attempt to communicate with your home network,
and if successful, with a known internet address.
If both attempts are successful, your network
connection should be good. If the player can
successfully connect to your home network, but not
to the known internet address, your internet service
may be "down", or your security fi rewall may be
blocking access of the player to the internet.
IP Settings
Link Down
xx:xx:xx:xx:xx:xx
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Apply
Cancel

Quick Setup

button, 1. In the main menu of Settings, press
then use
and then press OK to confi rm.
2. Press OK to perform Quick Setup.
To exit the setup menu:
• Use
through the full setup menu later", and then
press OK.
• Or press button directly.
3. Follow the on-screen instructions to customize
the following settings to your preference:
• Player Menu Settings • Resolution
• TV Aspect
4. After fi nishing all settings, select Exit and press
OK to exit the setup.
(Please see page14 for details.)
BD-Live
1. In the main menu of Settings, press
then use
2. Press button and press
an option, then press OK button.
3. Press
option, and then press OK button to confi rm
your selection.
4. Press
menu.
BD-Live Internet Access
• Limit Access — Allows Internet access with valid
"BDLive" network access approval.
• Always Allow Access — Always allows BD-Live
Internet access.
• Prohibit Access — Never allows BD-Live Internet
access.
BD-Live Storage
The available storage space is displayed next to BD-
Live Storage.
Erase Blu-ray Storage
If you choose OK to erase Blu-ray storage, all
bookmarks and BD-Live content saved in memory
will be deleted.
- 23 -
or button to select Quick Setup,
button to highlight "No thanks. I'll go
or button to select BD-Live.
or
or buttons to select the desired
or EXIT button to go to the previous
button,
button,
button to select