B_Rt2380 En 4/7/04 1:44 Pm; Digital Connection; Tv Connections; Connecting Antennas - RCA RT2380 User Manual

B_RT2380 EN 4/7/04 1:44 PM
Digital Connections
Read instructions carefully when connecting
components to the receiver.
Digital In Jacks can accept Dolby Digital (AC-3) or PCM
signals when compatible components are
connected.
3‰ 6‰
SUB CEN SR SL FR FL

TV Connections

TVs with RF input may need a RF modulator (not
included) for inputting audio / video signals.
RF in
The diagram shown above may varies from your actual RF
modulator, please refer to your RF modulator manual.
Page 9
OPTICAL DIGITAL IN (AUDIO)
Optical Fiber Cable
Connect to optical digital output of
DVD, CD, SAT or other compatible
devices.
SAT / DVD / CD Player / TV
COAXIAL DIGITAL IN (AUDIO)
Connect to coaxial digital output of
DVD, CD, SAT or other compatible
devices.
DVD / CD / SAT
COAXIAL OPTICAL
DIGITAL INPUT
S-VIDEO
MONITOR FM 75‰
IN IN
OUT OUT IN
GND AM LOOP
VIDEO
OUT
IN IN
L
L
AUDIO
R R
IN
COAXIAL OPTICAL
SUBWOOFER
PRE OUT DVD SAT TV VCR CD TAPE DIGITAL INPUT
TV
RF cable
RF out
RF modulator
AV in
AV cable
AV out
Getting Started
Connecting the Antennas
The AM and FM antennas connect to the AM and FM
terminals on the system's back panel.
They must be hooked up in order to receive clear
reception.
AM Loop Antenna and FM Indoor Antenna
1. Uncoil the Antenna wire and locate the base end of
the AM antenna.
2. Press down on the Antenna tab to open the terminal.
3. Inert the antenna wires into the terminal and release
the tabs to secure the wires in place.
HINT
• For FM reception, extend antenna to its full
length.
• For AM reception, rotate the antenna
horizontally to get better reception.
EN
5