Connecting The Speakers - RCA RTB1023 User Manual

Connections and Setup

Connecting the Speakers

Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal
and insert the wire. Release the tab to lock wire in the terminal.
Subwoofer
Gray and Black
To adjust each speaker volume level for optimum listening experience.
1) Press LEVEL button on the remote control to select FL (front Left speaker) on the unit display.
2) Press or buttons to adjust the value up or down (between -10dB and +10dB).
3) Repeat step (1) and (2) for the other speakers FR, CT, SW, SL, SR.
Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your
Volume Setting.
Note: When connecting the speakers, make sure the polarities ("+" speaker wire to "+" on the receiver)
of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the cords
are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage
the system's amplifi er.
Center Speaker
Green
and
Black
Purple and Black
SPEAKERS
3 6
Blue and Black
(Surround Sound)
Left
Right
Front Speakers
Right
Left
White and Black
Red and
Black
6 3
Rear Speakers
- 9 -
Insert
Press
Release