ADJ ELECTRAPIX PAR 7 PAK User Manual page 18

I N S T A L L A T I O N G U I D E L I N E S
The unit is fully operational in three different mounting positions: hanging upside-down from the ceil-
ing or trussing, sideways on trussing, or set on a flat level surface. Be sure this fixture is kept at least
12m (40ft) away from any flammable materials (decorations, etc). Always use and install a safety
cable (not included) as a safety measure to prevent accidental damage and/or injury in the event the
clamp fails. Never use the carrying handles for secondary attachment.
FALLING FIXTURES CAN CAUSE SEVERE INJURY OR SERIOUS EQUIPMENT
DAMAGE! FOR THIS REASON, FIXTURES SHOULD BE INSTALLED AND INSPECTED
ONLY BY QUALIFIED PERSONNEL. DO NOT INSTALL THE UNIT IF YOU LACK THE
QUALIFICATIONS TO DO SO, OR IF YOU HAVE DOUBTS ABOUT THE SAFETY AND
SECURITY OF THE INSTALLATION SETUP OR LOCATION!
ALWAYS ATTACH A SAFETY CABLE WHENEVER INSTALLING THIS FIXTURE IN A
SUSPENDED ENVIRONMENT TO ENSURE THAT THE FIXTURE WILL NOT FALL IF
THE CLAMP FAILS.
IF THE UNIT IS FITTED WITH THE OPTIONAL GEL FRAME OR BARNDOORS, THE
UNIT MUST BE INSTALLED WITH THE LATCH FACING UPWARD TO ENSURE THAT
THESE ACCESSORIES DO NOT FALL IF THE LATCH FAILS.
18