Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bestway SaluSpa BW54299
Summary of Contents for Bestway SaluSpa BW54299
- Page 6 SPECIFICATIONS 54299E Capacity: 2-4 Adults Massaging Turbo 6.5A Increased Heat Rate: Approximately Blower: F/h (1-1.5 C/h) Water Capacity (80%): 177 gal. (669 L) Heat Element: 11.3A at 110-120V AC, Power Rate: F (20 12A at 68 F (20 Pump: Inflated Size: 71in.
- Page 7 GFCI Test IMPORTANT: RISK OF ELECTRIC SHOCK. THE GFCI MUST BE TESTED BEFORE TURNING ON THE PUMP EACH TIME. 1. Plug the GFCI into a power outlet, the indicator turns red. 2. Press the test button, the indicator turns off. 3.
- Page 8 Assembly P6609ASS16 Inflate for 5 min. 3 seconds to unlock. Inflate for 2 min. To stop inflation.
- Page 9 Hyperthermia occurs when the internal temperature of the body reaches a level several degrees above the normal body temperature of 37°C (98.6°F). The symptoms of hyperthermia include an increase in the internal temperature of the body, dizziness, lethargy, drowsiness, and fainting. The effects of hyperthermia include failure to perceive heat;...
- Page 10 Alarms Causes Reasons Solutions The water flow sensors work 1. The water flow sensor flags didn’t fall 1. Unplug the pump, strike the side of the pump firmly (but not violently), and without pressing the filter or back into the correct position. plug it back in.
- Page 11 ON/OFF After the GFCI Test, press the "RESET" button , then press the pump button on the control panel for 3 seconds, then the indicator start to flash , pump has entered the matching condition. 2. Press the button for 3 seconds on remote control , the LED display on remote control will appear "PIR", remote controller has entered the matching condition.