Related Manuals for RASOR FP862M
Summary of Contents for RASOR FP862M
- Page 1 PNEUMATIC CUTTER FP862M USE AND MAINTENANCE INSTRUCTIONS Please read this manual carefully before using the device and keep it safe with the product. TRANSLATION OF ORIGINAL AND COMPLETE INSTRUCTIONS...
-
Page 2: Table Of Contents
RASOR ELETTROMECCANICA SRL Via Giannetto Mattei, 41/43 - 20044 Arese- (MI) - ITALY Model: FP862M Rasor Elettromeccanica S.r.l. declares, under its own re- sponsibility, that the aforementioned products, to which this declaration refers, comply with the Directives on the approxi- mation of the laws of EEC member states relating to: –... -
Page 3: General Information
Check that pneumatic and mechanical parts are in excellent working order before starting the device. Children must not play with the product. The FP862M pneumatic cutter may be fitted to O.E.M. Cleaning and maintenance intended to be carried out by machinery provided its original structure is not altered the user must not be carried out by unsupervised children. -
Page 4: Prohibitions
The product operates at a maximum temperature of 55°C. A laser nameplate (A) stating the product data is applied Technical specifications to the FP862M. Ensure the nameplate has been applied to the product; if not, inform the manufacturer and/or retailer im- Model FP862M mediately. -
Page 5: Package Contents
Package contents 1 10 Description of the device The FP862M is delivered with its accessories in a case (A). The The FP862M pneumatic cutter has been designed, built and as- sembled for cutting fabrics and all kinds of materials – EXCEPT product code and serial number are specified on the outer packaging. -
Page 6: Use
– Move the safety catch (3) and press the start lever (4); – Push the pneumatic cutter in the direction of the required cut, while keeping the material taut to avoid it curling up in the front part of the cutter. https://www.rasor-cutters.com... -
Page 7: Pressure Gauge (Optional)
Blade sharpening After several hours of continuous use, or if the pneumatic cut- Rasor Elettromeccanica S.r.l. makes available a “reducer fil- ter is no longer cutting as it should, sharpen the blade. ter with pressure gauge” already calibrated with the quantity of To sharpen the blade, start the cutter then press and hold the oil to be dispensed. -
Page 8: Replacing The Blade
HSS steel octagonal blade 86PHSS HSS steel pentagonal blade 86THSSTN HSS steel octagonal blade with TiN surface hardening 86THSSTF Teflon® coated HSS steel octagonal blade 86PHSSTF Teflon® coated HSS steel pentagonal blade Technical data are indicative and subject to change without notice. https://www.rasor-cutters.com... -
Page 9: Problems And Possible Causes/Solutions
Check the inside diameter of the hoses and connections (min. ø 8 mm) WARNINGS WARNINGS For an exploded diagram of spare parts Contact the retailer for problems not included in this table with item codes, visit www.rasor-cutters. https://www.rasor-cutters.com... -
Page 10: Disposal
– if the pneumatic scissors are used for purposes other than those stated in this manual; – if parts other than Rasor® original spare parts are used. Repairs made under warranty do not interrupt its duration. The competent court for all disputes is the court of Milan. - Page 11 PNEUMATIC CUTTER FP862M RASOR ELETTROMECCANICA SRL Via Giannetto Mattei 41/43 20044 Arese (MI) ∙ Italy ph. +39 02 66 22 12 31 info@rasor-cutters.com www.rasor-cutters.com USE AND MAINTENANCE INSTRUCTIONS FOLLOW US: FOLLOW US: Please read this manual carefully before using the device and keep it safe with the product.
Need help?
Do you have a question about the FP862M and is the answer not in the manual?
Questions and answers