Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for RASOR FP861V
Summary of Contents for RASOR FP861V
- Page 1 USE MANUAL english CUTTING UNIT MOD. FP861V ED.1-02/12 SERIAL NUMBER...
- Page 2 All the parts of the devices have been planned and produced to guarantee an optimum performance. In order to keep the high quality level and the long reliabilty of the Rasor ® products, it is recommended to use only original spare parts and to contact the head...
-
Page 3: General Safety Rules
1. GENERAL SAFETY RULES This manual is an integral part of cutting unit FP861V and must be carefully read before using it since it gives important indications with regards to its safe installation, use and maintenance. Keep it with care. - Page 4 Elettromeccanica S.r.l. machines have not been conceived to work in areas at risk of ® explosions and at high risk of fire. In case of damage or malfunction, cutting unit FP861V must not be used until the Customer Care Technical Service has repaired them. Customer Care Technical Service For any information, please contact ELETTROMECCANICA S.r.l.
-
Page 5: Transport And Packing
READ THE INSTRUCT ION MANUAL Model USE METAL GLOVES Serial number H _ _ _ _ _ _ _ _ _ _ FP861V M o t o r Year of production data USE GOGGLES SHEARING RISK... -
Page 6: Product Description
4. PRODUCT DESCRIPTION The fixture described in this manual is a pneumatic cutting unit model FP861V which can be assembled on automatic machines (e.g. spreaders, computerized cutting, etc...) by means of a proper bracket. Thanks to a reference pin on the front part and of an effective cutting... - Page 7 6. NOISE LEVEL The maximum acoustic pressure level emitted by cutting unit FP861V is about 60 dB (A). Noise tests have been carried out in compliance with Standard ISO 11202. The device noise levels, measured at different distances (without any sound wave filtering system), vary in the extent of few db (A).
-
Page 8: Use Warnings
· Always pay attention to the position of the air pipe to prevent it from being cut or damaged by the blade. · It is possible to assemble cutting unit FP861V on machines O.E.M. only if their original structure is not modified. Otherwise, the intervention must be certified by Rasor ®... -
Page 9: Installation And Use
7) Enable the air remotely and carry out the cutting operation. NOTE It is possible to use cutting unit FP861V both keeping it fixed and making the material slide and viceversa. It is important to keep the material to cut as stretched as possible to prevent it from curling... -
Page 10: Blade Sharpening
In order to carry out this operation, remove protective plug “A” located on the head of the cutting unit and fill it with Rasor lubricating grease. Screw plug “A” again a few turns. Screw plug “A” a few turns every 2-3 working days (see picture 8). -
Page 11: Blade Replacement
5) Replace the worn blade with the new one “2”, being careful to center the blade on the shaft, in the correct position, and remember to assemble it so that the operator can see the writing “Rasor”. 6) Assemble all the components again and sharpen the blade. -
Page 12: Troubleshooting
15. TROUBLESHOOTING PROBLEM SOLUTION à Check the counterblade integrity Check the kind of fabric Sharpen the blade The fabric is not cut or it gets stuck between the Check the fabric thickness blade and the counterblade Check the compatibility between blade and fabric Make sure that the turbine turns correctly Reduce the feeding speed Carry out the lubrication... - Page 13 ® dal 1946...
-
Page 14: Warranty
WARRANTY Rasor Elettromeccanica S.r.l. cutting unit has a 12 month warranty from the date indicated ® on the last page of this manual, except in case of different written agreements. The warranty covers all manufacturing and material defects. Replacement and repair operations are covered only if carried out by our company and at our workshop. -
Page 15: Declaration Of Conformity
RASOR ELETTROMECCANICA S.R.L. ® 3. Type: FP861V 4. Serial number: .................... 5. Year of manufacture: ................. 6. Country of manufacture: ITALY 7. Additional information: ................Date: Warranty expiry: RASOR ELETTROMECCANICA S.R.L. 12 months invoice date or receipt CUTTING EQUIPMENTS (Signature) - Page 16 Authorized dealer (Stamp)
Need help?
Do you have a question about the FP861V and is the answer not in the manual?
Questions and answers