Save & Exit - Nexcom X103 User Manual

Chapter 3: BIOS Setup
Save & Exit
Save Changes and Exit
After save all the changes, select this field then press <Enter>. A dialog
box will appear. Confirm by selecting "Yes" and then exit the system
setup.
Discard Changes and Exit
Press Enter to exit the BIOS without saving the changes. You may be
prompted to confirm again before exiting.
Copyright © 2024 NEXCOM International Co., Ltd. All Rights Reserved.
Restore Defaults
Press Enter to restore the BIOS to the default settings. Confirm by selecting
Yes when a dialogue box appears.
Boot Override
Select the desired device and press <Enter> to bypass the boot sequence
from the boot option list and boot from a specific device.
34
X103 User Manual