Safety Information - Intec ColorCut FB77 Series Installation & Setup Manual

Dual tool, flatbed digital die-cutters
Table of Contents

Advertisement

1.1 Safety Information

Safety measures
Please read the information and safety measures carefully prior to installation and initial
operation of the unit.
Do not place any magnetic objects in the vicinity of the cutting head; otherwise
uniform contact pressure may not be ensured.
Do not remove the connection cable to the computer while cutting is in progress.
Do not place hands or objects on the cutting table, when powered carriage beam
moves to top of table and may strike objects and cause damage.
Do not place hands or objects on the cutting table, when when in use, cutting
carriage moves at fast speed and may strike hands or objects on the cutting
table.
Only place sheets or remove cut sheets when the cutter is not in operation.
Do not open or reach into the unit when it is connected to electricity supply.
Never open the casing and do not make any modifications to the unit yourself.
Ensure that neither liquids nor metal objects are put inside the Intec FB775/
FB1175 Flatbed Cutting table.
Ensure that the wall socket used is grounded.
Ensure that the connected voltage (230V) does not deviate by more than ±10%.
Otherwise install a voltage stabiliser.
Remove the power plug from the unit if it will not be in use for a longer period of
time.
Never reach into the unit in the vicinity of the blade holder during the cutting
operation
Stop any cutting jobs in progress before re-adjusting the blade holder
Always ensure that the Intec FB775/FB1175 Flatbed Cutter is out of reach of
children during operation and never leave the unit or individual parts of it switched
on without supervision.
Do not touch the tip of the cutting blade to avoid injury.
Always place the unit on a stable base or use the supplied stand to prevent it from
falling down.
Disconnect from the power supply during thunderstorms; it can be damaged or
destroyed by electrical surges caused by lightning.
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ............................................................................................................. Page No: 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorCut FB77 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Colorcut fb1175 seriesColorcut fb775

Table of Contents