Intec ColorCut FB77 Series Installation & Setup Manual page 54

3.5.2 Calibration of the Sensor Offset to the Cutting Blade
The Sensor Offset Calibration value, is stored in your ColorCut Pro application and so
the calibration is perfomed by ColorCut Pro.
will need to launch the ColorCut Pro application and open the [SETTINGS] dialogue box
as shown below.
8.
Open ColorCut Pro from
Windows
Open the Windows
[START] menu
select ColorCut Pro from
the Programs/Intec folder.
The ColorCut Pro splash
screen will briefly appear,
then the main ColorCut
Pro application will be
displayed.
9.
The "Vision Sensor Offset"
setting provides the
1
ability to calibrate the sensor
offset automatically by using
the Auto-Find feature
shows the current setting
(which can be manually
adjusted if you prefer).
10
. Click the [AutoFind] button
to start the automatic sensor
offset
ColorCut
the Pen Calibration Tool to
repeatedly draw a box with a
thick frame
the box, it will then scan the
frame and automatically enter
the values into your Sensor
Offset X and Y settings. It will display a message when the process is complete.
You can now close this window, the calibration for ColorCut Pro is now complete.
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ........................................................................................................... Page No: 54
menu
and
AND
3
2
calibration. The
FB550 will use
Ⓓ
. After drawing
To continue the calibration process you
B
C
Ⓓ
D