Intec ColorCut FB77 Series Installation & Setup Manual page 14

1.5 IDENTIFYING KEY FEATURES (CONT.)
①
②
B
The Emergency Stop Switch. (EMS), press to cut power in an Emergency.
Note: If no power/display appears on the LCD panel when you power the unit on
please check the Emergency Stop Switch is not in the DE-PRESSED state, if it is,
press and turn it fractionally to enable it to lift and return power to the unit.
C The Tool Tray. The recess on the left side of the control panel screen can be used to
store spare tools for quick access when changing between tool holders for cutting
labels and tools for cutting card projects.
D The 5" LCD Display. The 5" LCD panel is a TOUCH sensitive control panel, situated
on the right side of the Control panel, it displays information about the current Tool
settings and menu parameters for each screen selected.
E
Pressing the light Grey TAB style buttons along the bottom of the LCD panel screen,
enables users to enter the individual functions screens, the Hard buttons
be used in each screen.
A range of Hard buttons can be found to left of the display.
F
H
LEFT
Off/Line
K
OFF/LINE
Off/Line
Please see the following pages for detail of the function of these buttons.
NOTE: The RED LED indicates the unit is powered on, and GREEN LED, illuminates as a key is pressed.
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ........................................................................................................... Page No: 14
④
Offline
UP
I
RIGHT
G
DOWN
ENTER
J
ENTER
ENTER
Enter Offline
Offline Enter Enter
③
TOOL 1
TOOL 1
F - K can