Daily Operation - Enabling Windows Wi-Fi Hotspot - Intec ColorCut FB77 Series Installation & Setup Manual

Dual tool, flatbed digital die-cutters
Table of Contents

Advertisement

2.3.4 Daily Operation - Enabling Windows Wi-Fi HotSpot.

10
. During daily operation you can now enable the connection to your Intec
FB775/1175 cutter by simply clicking on the Wi-Fi icon in the Windows task bar
M
(Bottom right of your screen).
Next click on the Mobile
HotSpot button
appears in the lower right
corner of the 'Network and
Internet settings' Dialogue
box/menu that appears.
The Mobile HotSpot button will
change color when it is activated,
and indicate the SSID name
(H3), and how many devices are
connected.
O
You can now skip to the section on Installing ColorCut Pro and calibrating your
FB775/1175 cutter.
However, if you do not have an Internet connection then follow the steps on how to
set up a direct connection to the Cutter without requiring an internet connection or
router. (Wi-Fi Direct Access Point following.)
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ............................................................................................................... Page No: 23
N
that
P
M
After enabling the mobile Hotspot,
ensure you power ON the Intec
SC5000 cutter, and allow 30 secs
- 2mins for it to connect to your
HotSpot. Your Mobile HotSpot
will show when the device is
connected.
P
N
O

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorCut FB77 Series and is the answer not in the manual?

This manual is also suitable for:

Colorcut fb1175 seriesColorcut fb775

Table of Contents