Setting The Ssid When Using Windows Wi-Fi Hotspot - Intec ColorCut FB77 Series Installation & Setup Manual

Dual tool, flatbed digital die-cutters
Table of Contents

Advertisement

2.3.2 Setting the SSID when using Windows Wi-Fi HotSpot.

5
. Under, Network Name, enter the SSID name 'H3' as shown G. Within the
field, Network password, enter the password '12345678'
will automatically try to connect to an SSID named "H3", with a password of
'12345678'. So, these entries must be set to match.
6
. The FB775/1175's Vision3 Image Echo feature ONLY connects under 2.4
is essential that you set the 'Network Band'
cutter will not connect to your HotSpot and you will not be able to see the Camera.
7
. Click save to save finish and save your setting. These will be remembered and in
future you only need to enable or disable the connection. When you click SAVE
you will be returned to the 'Windows Mobile hotspot' configuration dialogue box.
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ............................................................................................................... Page No: 21
G
H
I
to 2.4GHz, if you set it to 5
I
H
(The FB775/1175
, so it
GHz
GHz
the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ColorCut FB77 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Colorcut fb1175 seriesColorcut fb775

Table of Contents