How To Create A Hotspot (2 Different Approaches); Method 1 - Using Windows Wi-Fi Hotspot - Intec ColorCut FB77 Series Installation & Setup Manual

2.2 How to create a HotSpot (2 different approaches).

Once you have Wi-Fi enabled on your computer, there are 2 methods to establish a
connection to your Intec FB775/1175 flatbed cutter.
1.
Use the built in Windows HOTSPOT function. This is easy to use, and uses Windows
10's own HOTSPOT feature.
Note: Even though, you are will be connecting directly to the FB775/1175 cutter
(and you are not using the internet for this connection), the Windows HotSpot
feature requires an internet connection before you can enable the HotSpot.
So please bear in mind, without an internet connection made via a router the
Windows HOTSPOT feature can not be enabled. If you do not have an internet
connection then we recommend creating a DIRECT connection (Below) which
is how newer devices like some TV remote controls (Roku 3 )work, to do this
use a utility like Wi-Fi Direct Access point (below).
2.
Use the Wi-Fi Direct Access Point. This is a paid for utility from
the Windows Store, for Windows 10 users.
Wi-Fi Direct, makes a direct connection to the FB775/1175's Wi-fi video feed
from the Camera eliminating any routers or network management issues. It
does this using the Wi-Fi Direct standard, which enables devices to easily
connect with each other without requiring a wireless access point. Wi-Fi Direct
allows two devices to establish a direct Wi-Fi connection without requiring a
wireless router.

2.3 Method 1 - Using Windows Wi-Fi HotSpot

1.
Check the task bar on your computer
and ensure you have an internet
connection. If NO Wi-Fi connection
shows, or the "Not connected to the
Internet" icon shows
the icon and connect to your Wi-Fi
router and enter any ID or passwords
required.
2.
Check the task bar on your computer
and ensure you have a the Wi-Fi
connection showing
essential to start the Wi-Fi HotSpot)
Intec Printing Solutions - Manual for ColorCut flat bed series FB775/FB1175 ............................................................................................................... Page No: 19
C
then click on
D
. (This is
C
D