Button Controls; Spot Clean; Do Not Disturb Mode - iRobot Roomba Vac 2 Essential Owner's Manual

Cleaning

Button controls

1 Home button: Tap to send the robot home
2 CLEAN button: Tap to Start / Pause / Resume a job
Hold for 2-5 seconds to end a job
3 Spot clean button: Tap to spot clean a designated area
Cleaning pattern
Your robot will automatically explore and clean your home in neat rows. It will
return to the dock at the end of a cleaning job and whenever it needs to recharge.
Remove excess clutter from floors before cleaning. Use your robot
frequently to maintain well-conditioned floors.
After 90 minutes of inactivity off the dock, the robot will automatically end its
cleaning job. If you are unsure if the robot is finished or paused, visit the iRobot
Home App to check on its status.

Spot clean

Tap to spot clean a designated area. The robot will spiral outward about 3
feet (1 meter) and then spiral inward to end where it started. Please remove any
obstacles from the spot clean path. After spot clean is complete, the robot will
end the job. To send the robot back to its dock, tap

Do Not Disturb mode

In Do Not Disturb mode, the robot vacuum does not perform scheduled cleanings,
and the power icon light indicator turns off after one minute of charging. Do Not
Disturb mode can be enabled or disabled in the app.
Roomba® Vac 2 Essential robot + AutoEmpty™ dock Owner's Guide
EN
.
11