Product Description; Parts & Tools Needed; Setup Instructions - Bestway SALUSPA Owner's Manual

PRODUCT DESCRIPTION

HOT TUB HEATER SPECIFICATIONS:
PARTS & TOOLS NEEDED
Compare the parts in your box to the parts listed on the top of the package. Verify that the
equipment components represent the model that you had intended to purchase. If any parts are
damaged or missing at the time of purchase, visit our website bestwayusa.com/support.

SETUP INSTRUCTIONS

OVERVIEW
CHOOSING THE CORRECT LOCATION:
The location chosen where the hot tub will be installed must adhere to the following conditions:
• Because of the combined weight of the water inside the hot tub and the users, the surface chosen
must be capable of uniformly supporting the total weight for the entire time the hot tub is installed.
• The location selected must be no more than the length of the hot tub cord from the wall socket. The
hot tub plug must be plugged directly into the wall socket.
• For both indoor and outdoor installations, adequate drainage must be present.
• The surface must be flat and smooth. If the surface is inclined or uneven, it can create an unbalanced
load on the structure of the hot tub. This can damage the welding points.
• The surface must be clear of any type of object. Due to the weight of the water, any object under the
hot tub could damage or perforate the bottom of the hot tub.
• The selected location must not have overhead power lines or trees. Be sure the location does not
contain underground utility pipes, lines or cables of any kind.
• The selected location must be far from house entrance. Do not position any equipment or other
furniture around the hot tub. The water that comes out of the hot tub during use or due to product
malfunctions can damage furniture surrounding the hot tub.
• Do not assemble the hot tub on carpet or other floor materials (ex. untreated cork, timber or other
porous materials) that have the potential to harbor moisture and bacteria or that could be affected by
water treatment chemicals used in the hot tub.
• Consult your local government authority for installation regulations.
Suggested surfaces: grass, ground, concrete and all other surfaces that respect the above
set-up conditions.
Surfaces to avoid: mud, sand, gravel, deck, balcony, driveway, platform, soft/loose soil or other
surface that does not meet the above set-up conditions.
FOR WI-FI ENABLED HOT TUBS ONLY:
To choose the correct location for an app-controlled hot tub, read the hot tub Wi-Fi instruction leaflet
included in the package and these instructions.
Power Rate
110-120V AC, 60Hz, 12A
9