Advertisement
Quick Links
Advertisement
Related Manuals for TEMPLE & WEBSTER Shanley SBSHSBSO
Summary of Contents for TEMPLE & WEBSTER Shanley SBSHSBSO
- Page 1 SBSHSBSO ASSEMBLY INSTRUCTIONS Shanley Oak Bookshelf With Cabinet www.templeandwebster.com.au...
- Page 2 Keep these instructions for future reference Assemble the furniture on a soft level surface to avoid damaging the furniture or your floor. Parts of the assembly will be easier with 2 people. We recommend furniture be assembled near where they will be placed, to avoid moving the product unnecessarily once assembled.
- Page 3 WARNING： It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has been with a bracket. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the brackets provided and appropriate fixings.
- Page 4 Cross Screwdriver 60 min Top Panel (P1); Bottom Panel (P7); Left Side (P2); Bottom front rail (P8); Right Side (P3); Back Panel (P9); Left Door (P10); Shelf (P4)x3; Right Door (P11). Shelf (P5); Movable Shelf (P6); (P1) (P4) (P4) (P4) (P3) (P5) (P9)
- Page 5 8x30mm 6x34mm 15x12mm 75x25x15mm Wood Dowel x 26 Bracket x 2 Locking nut x 27 Connecting Bolt x 27 3.5x16mm 25x3mm Screw x 26 Felt Foot x 4 Push To Open x 2 Hinge x 4 3.5x16mm 20x20mm 5x16mm Screw x 10 Door Bumper x 2 Shelf Suport x 4...
- Page 6 1 x6 2 x3 (P7) (P8) Screw 3 x Bolts 2 into Bottom Front rail (P8). Insert 6 x Wood Dowels 1 into Bottom Panel (P7) and Bottom Front Rail (P8). If necessary, gently tap the wood dowels with a mallet. 3 x3 (P7) (P8)
- Page 7 1 x16 5 x4 7 x2 (P4)x3 (P5) Insert 16 x Wood Dowels 1 into Shelf (P5) and 3 x Shelf (P4). If necessary, gently tap the wood dowels with a mallet. Fix 2 x Push to open 7 to Shelf (P5) with 4 x screw 5 using a screwdriver. 2 x4 4 x2 5 x4...
- Page 8 1 x4 2 x20 (P3) (P2) Insert 4x Wood Dowels 1 into Left Side (P2) and Right Side (P3) . If necessary, gently tap the wood dowels with a mallet. Screw 20 x Bolts 2 into Left Side (P2) and Right Side (P3). 3 x10 (P2) (P4)
- Page 9 3 x10 (P4) (P4) (P4) (P5) (P3) (P7) Attach 3 x Shelf (P4),Shelf (P5) and Bottom Panel (P7) to Right Side (P3) with 10 x Locking Nuts 3 . Use a screwdriver to turn the nuts clockwise to lock. 3 x4 (P3) (P2) (P1)
- Page 10 5 x18 6 x4 (P9) Attach 4 x Felt Foot 6 to the Left Side (P2) and Right Side(P3). Place Back Panel (P9) onto the back as shown. If necessary, adjust the assembly so that the diagonal measurements of the assembly are equal. Fix the Back Panel (P9) to the Bottom, Left, Right Sides, Shelf, using 18 x Screws 5 as shown.
- Page 11 With help, carefully turn the Bookshelf over. I. With help, move the Bookshelf into position. Mark drilling points on the wall. If necessary, remove the Bookshelf and drill holes with sizes suitable for your wall fixings. III. Install wall fixings in the holes. Reposition Bookshelf and fix the wall brackets to the wall with appropriate wall fixing screws.
- Page 12 11 x4 (P6) Insert 4 x Shelf Supports 11 into desired locations on the side panels. Gently place the Shelf (P6) as shown.
- Page 13 9 x10 10 x2 8 x4 (P10) (P11) Fix 4 x Hinges 8 to Door (P10)(P11) using 8 x Screws 9 Fix 2 x Door Bumper 10 to Door (P10)(P11) using 2 x Screws 9 . (P11) (P10) Attach the door on the Bookshelf as shown.
- Page 14 If adjustment is necessary, please follow the steps below: To move doors up or down: loosen or tighten the screws on the hinge plate, as showm. To move doors in or out: loosen or tighten the screws on the hinge plate, as showm. To move doors left or right: Loosen or tighten the screws to suit, as shown.
- Page 15 To adjust the push-to-open latches, please follow the steps below: Push and release the piston once to allow the piston to extend. Turn the piston clockwise or anti-clockwise to adjust the position of the piston. Push the piston once to retract the piston.
- Page 16 Assembly is complete.
Need help?
Do you have a question about the Shanley SBSHSBSO and is the answer not in the manual?
Questions and answers