Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TEMPLE & WEBSTER SBMECTOK
Summary of Contents for TEMPLE & WEBSTER SBMECTOK
- Page 1 SBMECTOK SBMECTWH ASSEMBLY INSTRUCTIONS Memo Chest of 3 Drawers www.templeandwebster.com.au...
- Page 2 Keep these instructions for future reference Read these instructions and follow steps carefully to ensure you assemble the product correctly and avoid damages. Check that all parts and hardware have been provided before assembling the product. Place all contents on a clean, soft-flat surface to avoid scratching the product.
- Page 3 WARNING： It is STRONGLY RECOMMENDED that you ANCHOR this product. Toppling furniture can cause serious injuries and death. This product has been s with a strap. To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the straps provided and appropriate fixings.
-
Page 4: Tools Required
Tools Required Time Required DO NOT USE 30 min Parts List (P1) (P1). Top panel, x1 (P2). Left side panel, x1 (P3). Right side panel, x1 (P4). Top support rail, x1 (P5). Middle support rail, x2 (P6). Bottom support rail, x1 (P7). - Page 5 59pcs 59pcs 3sets 18pcs 30pcs 8sets 2pcs wall...
- Page 6 (CL) (P2) (P3) (CR) Screw 28 x Cam bolts (1) into Left side panel (P2) and Right side panel (P3) using a screwdriver as shown. Fix 3 x Slide Tracks (4 CL) onto Left side panel (P2) with 9 x Screws (5) using a screwdriver. Fix 3 x Slide Tracks (4 CR) onto Right side panel (P3) with 9 x Screws (5) using a screwdriver.
- Page 7 (P7) (P8) (P9) (P4) (P5) (P5) (P11) This is how a cam nut works..(P2) The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 8 (P3) (P7) (P8) (P4) (P9) (P5) (P5) (P11) Position Right side panel (P3) onto Top support rail (P4), Middle supports (P5), Bottom support rail (P11) and Back support rails (P7), (P8) and (P9) as shown. Insert 14 x Cam nuts (2) into Top support rail (P4), Middle support rails (P5), Bottom support rail (P11) and Back support rails (P7), (P8) and (P9).
- Page 9 (P1) Screw 9 x Cam bolts (1) into Top panel (P1) using a screwdriver as shown. Fix the Wall strap (8) with 1 x Screw (10) and 1 x Washer (9) to the Top panel (P1) as shown. (P1) (P7) (P4) (P3) (P2)
- Page 10 (P14) (P15) (P13) Fix Drawer back panel (P15) onto Left drawer side (P13) and Right drawer side (P14) with 4 x Screws (6) using a screwdriver as shown. Repeat with the remaining panels. (P15) (P17) Fix Drawer bottom support rail (P17) onto Drawer back panel (P15) with 2 x Screws (6) using a screwdriver. Repeat with the remaining panels.
- Page 11 (P16) (P13) (P14) (P15) Slide Drawer bottom (P16) into the grooves of Left drawer side (P13), Right drawer side (P14) and Drawer back panel (P15) as shown. Repeat with the remaining panels. (P12) (P12) (P13) (P14) Screw 6 x Cam bolts (1) into Drawer front (P12) using a screwdriver as shown. Position Drawer front (P12) onto Drawer sides (P13) and (P14).
- Page 12 (DL) (DR) (P14) Fix Slider runner (4 DL) onto the Left drawer side (P13) with 2 x Screws (5) using a screwdriver. Fix Slider runner (4 DR) onto the Right drawer side (P14) with 2 x Screws (5) using a screwdriver as shown. Repeat with the remaining drawers.
- Page 13 Slide the three drawers onto the track as shown. Fix 8 x Back panel holders (7) to assembled unit with 8 x Screws using a screwdriver.
- Page 14 wall Move the chest of drawers into position against a wall. Mark a suitable position for the wall fixing. Follow instructions to install the wall fixing onto the wall. Reposition the bedside table and fix the Wall strap (8) and 1 x Washer (9) to the wall with wall fixing. Assembly is complete.
Need help?
Do you have a question about the SBMECTOK and is the answer not in the manual?
Questions and answers