Advertisement
Quick Links
®
SARGENT 1331 DOOR CLOSER INSTALLATION
INSTRUCTIONS WITH FOLLOWING ARM SETS:
(JP10, JPH10); (JPS, JPSH); (JCPS, JCPSH)
Strength Adjustment From Size 1 Through 6.
CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY
OR DAMAGE
FOR ASSISTANCE, CALL SARGENT AT 1-800-727-5477 or
www.Sargentlock.com
Closer mounts on opposite to hinge (push) side of door. 1331JP10 Parallel Rigid Non Hold Open arm illustrated.
Right Hand Door – RH
Left Hand Reverse – LHR
Closer mounts on opposite to hinge (push) side of door. 1331JPS arm illustrated.
125JV and 581-1 accessories required for this application (supplied separately).
Right Hand Door – RH
Left Hand Reverse – LHR
Right Hand Door – RH
Left Hand Reverse – LHR
63-8160-6000-999
Standard Frame Installation
See Pages 3 and 4
Narrow Frame Installation
See Pages 3 and 4
Flush Partition Installation
Closer mounts on opposite to hinge (push) side of door. 1331JCPSH illustrated.
125JVF accessory required for this application (supplied separately).
See Pages 3 and 4
Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing is prohibited.
Left Hand Door – LH
Right Hand Reverse – RHR
Left Hand Door – LH
Right Hand Reverse – RHR
Left Hand Door – LH
Right Hand Reverse – RHR
A8160A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Assa Abloy SARGENT 1331
Summary of Contents for Assa Abloy SARGENT 1331
- Page 1 Left Hand Door – LH Right Hand Reverse – RHR Left Hand Reverse – LHR Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited.
- Page 2 3/8” (9.5 mm) deep on door opposite to closer Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited.
- Page 3 Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited.
- Page 4 Arm Mark Arm Mark Closer is shipped set at mid power setting. Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited.
-
Page 5: Standard Frame
8-3/8 (212.7) 3-1/8 110° 7-3/4 (197) (79) Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. (305) (19) All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited. - Page 6 Open force and disengage the Hold-Open mechanism. DECREASE INCREASE Thumbturn Hold Open Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited.
-
Page 7: Unit Adjustment
10° CLOSED Standard Closing Cycle Copyright © 2013 Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written A8160A permission of Sargent Manufacturing is prohibited. Page 7...
Need help?
Do you have a question about the SARGENT 1331 and is the answer not in the manual?
Questions and answers
Do you have instruccions in Spanish